Bunn Infusion Series ICB Tall Coffee Brewer - 53100.6101
Bunn Infusion Series ICB Tall Coffee Brewer - 53100.6101
SERVER SOLD SEPARATELY
Features:
- Sleek, modernized design language on the brewer and servers
- Rounded angles on the corners and trunk
- Digital readout displays in English, Spanish, or French ---for easier programming and control--- and can show either ‘Standard’ or Metric measurements. Digital readout also shows machine status, and targeted advertising messages can be programmed for display.
- Energy-saver mode reduces tank temperature during idle periods
- Electronic funnel lock prevents removal of each brew funnel until drip-through is complete
- Brew counter keeps track of how many batches are brewed
- BUNN Infusion Series technology allows for multiple recipes from one footprint with six brew buttons and three batch sizes
- Pre-infusion and pulse brew for maximum flavor extraction. Cold brew lockout & digital temperature control further ensure top-notch brewing.
- Exclusive Peak ExtractionTM Sprayhead is multi-directional with a 17-hole design to ensure ultimate uniformity of extraction
- USB programming
- Hot water faucet (supplied for custom installation)
Electrical Configuration and Specs:
- Capacity: Incoming water temp of 60oF (15.5oC)
- Electrical: Requires 2-wires plus ground service rated 120/240V, single phase, 60Hz. Brewer is supplied with a cordset and a NEMA 5-15P plug. Receptacle is not included (NEMA 5-15P).
- Plumbing: 20-90 psi (138-621 kPa). Supplied with 3/8” male flare fitting.
- Volts-Factory Wired: 120
- Watts-Factory Wired: 1700
- Cord Attached: Yes
- Cubic ft.: 3.36
- Capacity: Incoming water temp of 60oF (15.5oC)
- Electrical: Requires 2-wires plus ground service rated 120/240V, single phase, 60Hz. Brewer is supplied with a cordset and a NEMA 5-15P plug. Receptacle is not included (NEMA 5-15P).
- Plumbing: 20-90 psi (138-621 kPa). Supplied with 3/8” male flare fitting.
- Dimensions: 35” x 22” x 10.2” (88.9cm x 55.9cm x 25.9cm)